126157 -

Apply adhesive to the metal rim and the edge of the fabric. Let it become tacky before pressing them together. Work in small 6-inch sections. 4. Trimming and Reassembly

If you were referring to "126157" in a different context, here are other possible matches:

Measure the bows and the headliner to ensure they are perfectly centered within the loops. 126157

High-quality contact cement (brush-on is often preferred for precision over spray).

Insert the first into the factory grommets and mounting holes. This anchors the headliner’s position. Apply adhesive to the metal rim and the edge of the fabric

Before starting, ensure you have a clean, controlled environment. The headliner is typically off-white cloth and picks up dirt extremely easily.

Pull the headliner toward the front windshield and rear window. Use clamps to hold it in place temporarily. Insert the first into the factory grommets and

Cut the loops slightly to expose only the very ends of the bows for mounting.