Switch SW1 to OFF . The door is now calibrated to its vertical limits. 4. Troubleshooting and Diagnostics
For industrial usage, the CDM9 system is generally rated for: Up to 200,000 cycles or 10 years. CDM9з”µжњєзљ„зј–зЁ‹пј€VLпј‰.mov
If the door uses a pneumatic seal (bottom gasket), ensure a solid floor surface is available; without a floor or obstruction, the machine cannot calibrate the stop position. 3. Programming Procedure ("Programming the Road") Switch SW1 to OFF
Technical Guide: Programming the CDM9 Automation Drive (VL Configuration) 1. Introduction without a floor or obstruction
The following steps are standard for calibrating the CDM9 drive using the internal :