Gyro Series 3ch-777 Instructions Review

The helicopter is powered by a built-in Li-Polymer battery and typically requires about of charging for an 8-minute flight.

: Connect the included USB cable to a computer or standard USB adapter. A light on the cable usually glows during charging and turns off (or changes color) when complete.

Switch on the helicopter first (LEDs will flash), then switch on the remote. Gyro Series 3ch-777 Instructions

This report provides the essential instructions for operating the (also known as the GHG3-6 tactical wireless helicopter), a 3.5-channel infrared remote-controlled helicopter. 1. Pre-Flight Preparation & Charging

Place the helicopter on a flat, level surface with the tail facing you. The helicopter is powered by a built-in Li-Polymer

: Ensure the helicopter’s power switch is in the OFF position before charging. Charging Options :

: Some models allow charging directly from the remote control using a small built-in cable tucked into a side compartment. Switch on the helicopter first (LEDs will flash),

: Push the Left Throttle Stick all the way to the top and then pull it all the way down. The blinking lights on both the helicopter and remote should become solid, indicating they are paired. 3. Flight Controls Flying a 3 Channel RC (gyro) Helicopter. - Instructables