Use TAPE A for your primary deck. Connect the deck's outputs to the "PLAY" jacks and inputs to the "REC" jacks.
Boosts bass at low volume levels. Turn off for normal or high-volume listening. Kenwood Kr 710 Manual
Bass and Treble knobs provide a flat response when set to the center. 2. Rear Panel Connections Use TAPE A for your primary deck
Connect your turntable’s left/right phono plugs here. Use the GND terminal for the turntable's ground wire to prevent humming. Antenna Setup: Connect an indoor 300 Ωcap omega Turn off for normal or high-volume listening
Ensure the AC voltage switch (110–120V or 220–240V) matches your local power supply before plugging in. 3. Technical Specifications Specification Power Output 28 watts per channel into 8 Ωcap omega Frequency Response 7Hz to 200kHz Total Harmonic Distortion Signal-to-Noise Ratio 78dB (Phono), 104dB (Line) Dimensions 458 x 123 x 298 mm (approx. 18" x 4.8" x 11.7") 4. Basic Troubleshooting
Features 3 red LEDs and 1 green LED. Follow the red lights to center the frequency; the central LED turns green once the servo-lock system has perfectly centered the station to minimize distortion.