Nano10.rar -

Your PC’s IP address must be in the same range (e.g., 192.168.1.10 ) for the initial setup. If your router uses 192.168.0.x , you must temporarily change your PC's IP to the .1.x range to access the PLC's configuration page and update its address. 3. Basic Programming (i-TRiLOGI) Once the software is running and the hardware is connected:

Below is a guide for extracting and setting up the software typically found within this archive. 1. Extraction and Software Installation nano10.rar

to a specific SCADA system or just doing basic ladder logic programming? user's manual - triplc.com Your PC’s IP address must be in the same range (e

For more detailed technical specifications, you can refer to the Nano-10 User Manual or the Quick Start Guide provided by the manufacturer. Are you trying to connect the Basic Programming (i-TRiLOGI) Once the software is running

Use a utility like WinRAR or 7-Zip to extract the contents.

Run the extracted .jar or .exe file (often named TRiLOGI.exe ) to launch the programming environment. 2. Hardware Connectivity To communicate with the