P1074464_wt.7z

: If a face is too complex, use a "Split Line" to break it into smaller segments before applying the draft to each part individually.

: For extremely difficult geometry, copy the surfaces, apply the draft to those surfaces, trim them, and then "Solidify" them back into the main part. p1074464_wt.7z

: In many CAD packages like SolidWorks or Autodesk Inventor , you can enable a "Draft" option directly within the Extrude feature properties to apply the taper as the solid is created. Troubleshooting and Advanced Techniques : If a face is too complex, use

If the standard feature fails (which often happens on complex surfaces like fenders or casting pockets), consider these professional workarounds: copy the surfaces

: If a specific area requires no taper, try entering a value of "0" for the draft in that section to maintain verticality while drafting surrounding faces.

Based on community discussions regarding similar drafted features, here is how you can effectively apply a draft:

: Often used for more complex geometry, this method allows you to use a specific edge or curve as the split point for the draft. This is highly recommended for parts with non-planar divisions.