Part 2- Mehakzip -

: If you are replacing a standard zipper, sew the

: Once connected, pull the zipper slider up. The magnetic base ensures the teeth are perfectly aligned before you start, allowing for effortless one-handed operation. Maintenance Tips Washing : and additional are generally machine washable.

: Listen or feel for the "click" as the magnets pull the sides into the correct starting position. Part 2- Mehakzip

tape onto your jacket or hoodie using a standard sewing machine or by hand. For the ZipperBuddy MagZip and other retrofitted versions, follow these steps:

: If you aren't comfortable sewing, look for pre-installed ANKHGEAR hoodies or ZipperBuddy kits that attach without permanent changes to your clothes. ZipperBuddy MagZip - ANKHGEAR : If you are replacing a standard zipper,

: Measure your garment and cut the zipper to the required length using standard scissors.

: Unzip the slider to work with each side of the tape independently. Prepare the Top End : Identify the plastic tooth where you want the zip to stop. : Listen or feel for the "click" as

Place a metal top stop over the gap where you removed the tooth. Squeeze it tightly with your pliers to secure it. Repeat this process for the other side of the zipper